Your location：
- Product Name：Mold heater
Category：Heating and Cooling Series
Controlled by microprocessor, liquid-crystal display, touch button.
Chinese and English versions are available. It is easy to operate and understand system error.
P.I.D control adopted, keeping the mould temperature accurately (less than ±0.5℃).
The electrical and heating equipment was designed to be separated to avoid high temperature damage to machine.
Used high quality and high efficiency pumps, applicable to all kinds of mould temperature control requirements.
The inside was made of stainless steel, corrosion resistance, high pressure explosion protection, constant temperature for a long time and high heat efficiency.
Six protective measures: alarm for thermocouple open circuit, phase fault protect, pump protect, overheat protect and water shortage protect.
Model | Medium | Max. Temp. | Pump Power (kW) | Max.Flow Rate (L/min) | Pump Lif(m) | Tank Capacity (L) | Heating Power (kW) | Inlet/Outlet Diameter (inch) | Dimension (cm) | Net Weight (kg) |
WSTW-06W | Water | 95°C | 0.37 | 35 | 30 |
| 6 | 12mm×3 | 88×31×74 | 60 |
WSTW-09W | 0.75 | 50 | 30 |
| 9 | 12mm×3 | 88×31×74 | 60 | ||
WSTW-12W | 1.5 | 80 | 45 |
| 12 | 12mm×4 | 88×31×74 | 60 | ||
WSTW-24W | 2.2 | 200 | 30 |
| 24 | 12mm×4 | 110×44×109 | 120 | ||
WSTW-36W | 3.75 | 380 | 35 |
| 36 | 1.5" | 110x44x109 | 30 | ||
WSTW-60W | 3.75 | 380 | 35 |
| 60 | 1.5" | 110×44×109 | 135 | ||
WSTW-06W-D | 0.37×2 | 35×2 | 30 |
| 6×2 | 12mm×6 | 88×62×74 | 98 | ||
WSTO-06W -D | Heat Transfer Oil
| 200°C | 0.37×2 | 35×2 | 30 | 10×2 | 6×2 | 12mm×6 | 88×62×74 | 02 |
WSTO-06W -R | 160°C
| 0.55 | 33 | 40 | 18 | 6 | 3/8"×3 | 105×35×84 | 80 | |
WSTO-09W -R | 0.75 | 45 | 40 | 18 | 9 | 3/8"×3 | 105×35×84 | 85 | ||
WSTO-12W -R | 0.75 | 45 | 40 | 18 | 12 | 3/8"×4 | 105×35×84 | 85 | ||
WSTO-06W | 200°C | 0.37 | 35 | 30 | 10 | 6 | 3/8"×3 | 88×31×74 | 62 | |
WSTO-09W | 0.75 | 50 | 30 | 10 | 9 | 3/8"×3 | 88×31×74 | 65 | ||
WSTO-12W | 1.5 | 80 | 45 | 10 | 12 | 3/8"×4 | 88×31×74 | 75 | ||
WSTO-24W | 2.2 | 320 | 30 | 10 | 24 | 3/8"×4 | 110×44×109 | 120 | ||
WSTO-36W | 3.75 | 550 | 35 | 10 | 36 | 1.5" | 110×44×109 | 130 | ||
WSTO-60W | 3.75 | 550 | 35 | 10 | 54 | 1.5" | 110×44×109 | 135 |
Model | Max.Temp. | Heating Power | Pump Power | Max.Flow Rate | Pump Lift | Inlet/Outlet Diameter | Dimension(cm) |
VTW-06W | 120°C | 6 | 0.37 | 35 | 30 | 3/8"×3 | 88×31×74 |
VTW-09W | 9 | 0.75 | 50 | 30 | 3/8"×3 | 88×31×74 | |
VTW-12W | 12 | 1.5 | 80 | 45 | 3/8"×4 | 88×31×74 | |
VTW-06W-H | 160°C | 6 | 0.55 | 30 | 45 | 3/8"×3 | 88×31×74 |
VTW-09W-H | 9 | 0.75 | 45 | 60 | 3/8"×3 | 88×31×74 | |
VTW-12W-H | 12 | 1.5 | 90 | 55 | 3/8"×4 | 88×31×74 |
Note: For stability, the pressure of cooling water should be between 2 and 5kg/ cm² .
Power supply: 3Φ 380VAC 50Hz
We reserve the right to change specifications without prior notice.
